Description
Semco Teak Sealer
Onward Marine strives to provide you with the very best for your vessel, including our Semco Teak Sealer.
Protect Your Teak
Our Semco Teak Sealer is a solvent based teak finish with water-like viscosity which further protects your teak from mould/mildew, UV light, moisture & colour loss. Semco does not contain silicone, varnish, polymers or exotic oils. When properly applied, your teak will look as if it has nothing on it, yet it will not turn grey or support the growth of mildew.
When applying, make sure teak is dry before you start. Always use a lint free cloth or foam brush as this will allow you to control where you are applying the sealer, avoiding flicks & splashes.
When using Semco for the first time, we recommend applying two coats. The first coat will be absorbed into the wood and disappear, the second coat will then provide the colour finish you require. On future applications, you can then choose to either apply one or two coats for maintenance.
With seasonal recoating, your teak will be preserved & protected for many years.
Available in Three Sizes
- Pint – Approx coverage of 3.75 square metres
- US Quart – Approx coverage of 7.5 square metres
- US Gallon – Approx coverage of 30 square metres
Four Different Colours
- Natural
- Cleartone
- Honeytone
- Goldtone
For further details on how to look after your teak, make sure to check out our blog post – ‘Protecting Marine Furniture’.
